GB30 Grain Buggy – Chaser Bin
White Industries have been designing and producing innovative grain buggies for the agricultural market since the early 70’s. Our latest offering sees the familiar functionality, but a dramatic change in design.
Early bin designs were limited to approximately 100 bags or eight tons on a single axle. We can now offer 30 ton bins, on a special design rocking beam with dual axle. This new design allows for 40 degrees of osculation, or in layman’s terms 700mm of travel.
The other radical change descends from the automotive industry, in using bolted sections for the bin components instead of welding. This innovation allows us to be the only Australian manufacturer to powder coat their bins instead of painting them. The automotive industry has been using this method since the turn of the century and has stood the test of time.
To Find out more contact Craig White
Specifications
| SIZE | 30T |
|---|---|
| CAPACITY | 30 Tonne |
| TYRES | 30.5X32” 16 PLY |
| WHEEL CENTRES | 3.0m |
| AXLE CENTRES | 2.0m |
| DISCHARGE AUGER/AUGER CLEARANCE | 4.16m |
| DISCHARGE @ 700RPM | 10T/min |
| LIFT AUGER | 19" |
| CROSS AUGER | 14" |
| HEIGHT | 3.52m |
| HEIGHT TO HIGH SIDE | 3.87m |
| LENGTH | 10.0m |
| LENGTH (Tip of Pull to Back) | 9.6m |
| BIN WIDTH | 3.5m |
| BIN LENGTH | 6.8m |
| WIDTH OVER TYRES | 3.7m |
| TONGUE HEIGHT | Adjustable |
| INSPECTION WINDOWS | 4 |
| PTO | 1000rpm |
Unique Features
-
Bin construction consists of component parts Powder coated prior to bolted assembly
This construction, not only allows for the powder coat finish but is also a great advantage for ease of mending unforeseen damage.
-
Thordon bushing used in equalizer beams which never needs greasing
Heavy duty Australian made Hubs and Stub axles (Not Chinese).
-
Superior designed Equalizer/Walking beams
The 750 mm of travel gives more travel on contoured country and in gullies, eliminating chasis stresses caused by suspension bottoming out.
General Features
- 3m wheel centres for controlled traffic
- No hydraulic hoses or rams inside bin, meaning there is no chance of contamination of grain with hydraulic oil. Giving ease of maintenance.
- Discharge of 10 tonne per minute at 700rpm
- 19”lift auger balanced for high speed operation
- 14” cross auger
- Hardbro GB26 Gear Box
- Inspection door on transfer box gives easy access for maintenance
- Adjustable discharge Chute clearance 4170mm to ground
- Bin sides 37 degree angle ensures a complete emptying
- Large access door in back of bin (no tedious unbolting)
- With safety feature, accessible only when empty
- Folding ladder with comfortable wide step treads
- All inner top bracing folded at 30° for unhindered grain flow
- Both right and left hand internal shut off slides lift in unison so as to allow for even unloading of bin
- 3 large windows at the front and 1 large rear window for ease of sight into bin for operator
- Grain sample door designed for easy access
- 3 piece hinged bottom clean out doors for easy cleaning
- Adjustable hitch
- Heavy duty Roll Top Tarp
Optional Extras
- Indicator Lights
- Unload Auger Work Light
- Rear flashing light
- Oversize sign
- Intermediate PTO Drive Shaft with bearing support for undulating terrain
